GF Primofit Galvanised

GF_Logo

Georg Fischer Primofit Compression Fittings are made out of malleable cast iron, with hot dip galvanised or black finish. The small and compact fittings have a design of fitting bodies and nuts which allow the use of shrink sleeves.

All fittings are pre-assembled and dismantling is not required, meaning no special tools are necessary and quick assembly can be achieved at low costs.

GF_Logo

Georg Fischer Primofit Galvanised

Georg Fischer Primofit is a compression fitting which offers full end load capability. Additionally it allows a misalignment of the connected pipes up to 3° per compression joint.

Compression fitting according to prEN 10344 for connection of galvanised steel pipes according to EN 10255 and EN 10220 with measurements according to ISO 65

Click here for Technical Brochure

Features

  • Primofit compression fittings are pre-assembled, dismantling is not required
  • Minimum pipe preparation
  • End-Load resistant (push and pull-out), a fixing of the pipe is not required
  • Quick assembly - low costs
  • No special tools necessary
  • Small and compact fitting
  • Design of fitting bodies and nuts allow the use of shrink sleeves

Materials

Primofit compression fitting body and nuts are made out of white heart malleable cast iron EN-GJMW-400-5 acc. to EN 1562, sealing materials as above.

Corrosion protection by hot dip galvanising according to prEN 10344.

Primofit Firejoint

Primofit Firejoint is a compression fitting which offers full end load capability and resistance against fire impact from outside, 650°C according German DVGW and 850°C according to British Gas test procedures. An additional graphite ring maintains end load capability and sealing in case of a fire. Additionally it bears a misalignment of the connected pipes up to 3° per compression joint.

Compression fitting according to prEN 10344 for connection of galvanised or black steel pipes according to EN 10255 and EN 10220-series 1 with measurements according to ISO 65.

Top pick products