TP ABS Imperial

TP_Logo

Techno Plastic’s flexibility and dynamism are the two main characteristics of the company that allows them to satisfy any kind of specific request. Each TP product is designed to meet the demands of the customers in specific application areas such as water distribution, swimming pools and food processing plants.

The constant research for improvement and efficiency of their company has enabled them to obtain the Quality System Certificate (SQP ISO 9002).

TP_Logo

Tecno Plastic ABS

Material:

ABS is a homogenous material with high impact resistance and elasticity given by the butadiene component.

A major advantage of the material is the working temperature range -40 to +60°C at pressures up to 15bar. Pressure ratings for the thermoplastic pipe and fittings are always quoted for water at 20°C and it is a fundamental principle in thermoplastic pipework that if the temperature increases then the working pressure must be reduced. With high impact strength and good abrasive resistance.

ABS is generally resistant to most diluted inorganic acids, bases and salts and to most animal oils and fats. Chemical resistances are in compliance with ISO/TR 10358.

Click here for Technical Brochure

Use:

Rigid ABS fittings are suitable for connecting ABS pressure pipes in the following fields:

  • Irrigation,
  • Water distribution,
  • Swimming pools,
  • Food processing plants, etc.

Sanitary Regulations:

TP's ABS fittings are produced with non toxic material and are suitable for conveying potable water and foodstuffs in accordance with the prescriptions of National Authorities in Italy (C.M.102.d.t.d.02.12.78) and in other countries.

Standards:

ABS fittings are usually produced in accordance with BS 5391-2 dimensions. However, TP can also produce then in accordance with ISO 727 and BS EN ISO 15493 standards, only upon request and specific quantities.

Sizes:

  • Fittings
  • Inch sizes 1/2” to 8”
  • Ball Valves
  • Inch 1/2” to 4
  • Check Valves 1/2” to 3”
Top pick products