- Home
- Pressure Metals
- Carbon Steel
- Geberit Mapress Carbon Steel Pipe & Fittings
Geberit Mapress Carbon Steel Pipe & Fittings
Geberit Mapress Carbon Steel is especially suited for closed heating and cooling circuits. For solar and industrial installations, there is a special range of fittings available.
Thanks to the pressing technology, installations can be carried out reliably and quickly without complex welding and soldering.
Mapress pipe is supplied in 2 x 3m lengths to assist with shipping. Please call us on 01743 860088 if you require pipe to be supplied in 6m lengths.
Geberit Mapress Carbon Steel
Geberit Mapress Carbon Steel is especially suited for closed heating and cooling circuits. For solar and industrial installations, there is a special range of fittings available.
Thanks to the pressing technology, installations can be carried out reliably and quickly without complex welding and soldering.
There are three types of Carbon Steel pipe available; externally galvanised for closed heating and industrial applications, plastic coated for chilled water applications, and internally and externally galvanised pipe made specifically for wet sprinkler systems.
Click here for Technical Brochure
Click here for Application Overview
Benefits of Geberit Mapress Carbon Steel
Quick
- Lower labour costs in comparison to conventional connection technology
Clean
- Extremely suitable for renovation of living areas
- Seal rings are protected from dirt
Safe
- No danger of fire as no welding or soldering necessary
- Unpressed connections are easily identified
- It is easy to distinguish between product materials using the
- indicator colours
- Application ranges are easily identified by the plug colours
- No danger of confusion with third-party products
Economical
- No consumables such as oxygen or gas required
Simple
- Simple connection technology
Universal
- Can be used for surface-mounted and concealed installations
Variety of pipes
- Three types of Carbon Steel pipe to suit different applications, including plastic coated for chilled applications
.
Experienced
- More than 30 years of practical experience in pressing technology
Always consider
The 6 stage pressing process:
- Cut and deburr the pipe
- Mark the insertion depth on the pipe
- Prepare the fitting
- Insert the pipe in to the fitting
- Press with the appropriate jaw or collar
- Remove the pressing indicator
Check you are using the correct material for the required application. Only Geberit Mapress system pipes are suitable to press Geberit Mapress Carbon Steel fittings. To adapt on to existing or dissimilar materials you must use a threaded connection.
Use the correct tooling
Always check that you are using the correct tools, this can be checked in the Geberit Tooling Product Guide and Price List. Make sure that the tools you are using are in a good condition and are calibrated. There should be a sticker on the tool, jaws, collars and adapters to tell you when the tool next needs calibrating.
- System Pipe Outside Zinc-Plated 6m Length 18 item
- System Pipe Plastic Jacketed 6m Length 8 item
- System Pipe In. and Out. Zinc-Plated 6m Length 14 item
- Pipe Nipple Outside Zinc-Plated 10 item
- 90 Degree Bend 12 item
- 90 Degree Bend with Plain End 11 item
- 90 Degree Bend with Plain Ends 8 item
- Elbow Adaptor 90 with Male Thread 7 item
- Elbow Adaptor 90 with Female Thread 4 item
- Bend Adaptor 90 with Male Thread 9 item
- Bend Adaptor 90 with Female Thread 10 item
- 45 Degree Bend 12 item
- 45 Degree Bend with Plain End 11 item
- T-Piece 12 item
- T-Piece Reduced 47 item
- T-Piece with Female Thread 25 item
- T-Piece Female Thread & Plain Ends 6 item
- Pipe Cross Reduced 12 item
- Pipe Cross Reduced Offset 7 item
- Coupling 12 item
- Coupling Reduced 3 item
- Slip Coupling 12 item
- Reducer with Plain End 32 item
- Pipe Bridge 5 item
- Geberit Mapress T-Piece Reduced 7 item
- Adaptor with Male Thread 23 item
- Adaptor with Male Thread and Plain End 11 item
- Adaptor with Female Thread 18 item
- Adaptor with Female Thread and Plain End 15 item
- Union 8 item
- Adaptor Union with Male Thread 8 item
- Adaptor with Union Nut 17 item
- Flange PN 6 with Pressing Socket: 8 item
- Flange PN 6 with Plain End 8 item
- Axial Expansion Fitting Pressing Sockets 10 item
- Cap 12 item
- Geberit Mapress metal Pipe Connector Bend 90 with 1 item
- Connector T-Piece Set for Return Flow 3 item
- Connector T-Piece Set Inlet and Return Flow 3 item
- T-Piece Set Inlet & Return Flow Union Connector 4 item
- Connector with Union Nut 3 item
- Adaptor with Plain and Welding End 10 item
- Suction Nozzle for Single Pipe Heating 3 item
- Flange PN 10-16 with Pressing Socket 9 item
- Adaptor Union with Female Thread 8 item
- - 173 item
- 1 1/2" 12 item
- 1 1/4" 11 item
- 1 3/4" 2 item
- 1" 22 item
- 1.4cm 1 item
- 1.7cm 1 item
- 1/2" 54 item
- 1/8" 1 item
- 11.7cm 1 item
- 12mm 9 item
- 12mm/p 1 item
- 14.3mm 1 item
- 14.4cm 1 item
- 15mm 31 item
- 15mm/p 1 item
- 17.2mm 1 item
- 18mm 15 item
- 18mm/p 1 item
- 2 1/2" 3 item
- 2 1/4" 1 item
- 2 3/4" 1 item
- 2" 12 item
- 2.4cm 1 item
- 2.6cm 2 item
- 21.3mm 1 item
- 22mm 13 item
- 22mm/p 1 item
- 26.9mm 1 item
- 28mm 15 item
- 3 1/2" 1 item
- 3" 2 item
- 3.1cm 1 item
- 3.7cm 1 item
- 3.9cm 1 item
- 3/4" 34 item
- 3/8" 15 item
- 33.7mm 1 item
- 35mm 13 item
- 4" 1 item
- 4.4cm 1 item
- 4.6cm 1 item
- 42.4mm 1 item
- 42mm 7 item
- 48.3mm 1 item
- 5.6cm 1 item
- 5.9cm 1 item
- 54mm 8 item
- 60.3mm 1 item
- 66.7mm 2 item
- 76.1mm 5 item
- 8.8cm 1 item
- 88.9mm 3 item
- D2cm 1 item
- D3cm 1 item
- D7cm 1 item