Geberit Mapress Stainless Steel is especially suited for potable water installations as well as for open and closed heating and cooling circuits. There are special fittings available for gas installations, as well as solar and industrial applications.
Thanks to the pressing technology, installations can be carried out reliably and quickly without complex welding and soldering.
In addition to the standard Geberit Mapress Stainless Steel product range, LABS free fittings are also available.
Lower labour costs in comparison to conventional connection technology
Extremely suitable for renovation of living areas
Seal rings are protected from dirt
No danger of fire as no welding or soldering necessary
Unpressed connections are easily identified
It is easy to distinguish between product materials using the
Application ranges are easily identified by the plug colours
No danger of confusion with third-party products
No consumables such as oxygen or gas required
Simple connection technology
Can be used for surface-mounted and concealed installations
High molybdenum content
High resistance to corrosion due to 2.2% minimum Molybdenum content compared to the industry standard of 2%
More than 30 years of practical experience in pressing technology
The 6 stage pressing process
Cut and deburr the pipe
Mark the insertion depth on the pipe
Prepare the fitting
Insert the pipe in to the fitting
Press with the appropriate jaw or collar
Remove the pressing indicator
Check you are using the correct material for the required application. Only Geberit Mapress system pipes are suitable to press Geberit Mapress Stainless Steel fittings. To adapt on to existing or dissimilar materials you must use a threaded connection.
Use the correct tooling
Always check that you are using the correct tools, this can be checked in the Geberit Tooling Product Guide and Price List. Make sure that the tools you are using are in a good condition and are calibrated. There should be a sticker on the tool, jaws, collarsand adapters to tell you when the tool next needs calibrating.