Geberit Mapress CuNiFe is a sea water resistant material. It is especially suited to shipbuilding and has proved itself over many years with pipelines carrying salt water in lots of installations.
The copper-nickel-iron alloy is used in shipbuilding for engine room systems, the supply of service water, pool water and heating water.
Thanks to the pressing technology, installations can be carried out reliably and quickly without complex welding and soldering.
Lower labour costs in comparison to conventional connection technology.
Clean
Clean installation using the Geberit pressing technology. No consumables required.
Safe
No danger of fire as no welding or soldering necessary Unpressed connections are easily identified It is easy to distinguish between product materials using the indicator colours Application ranges are easily identified by the plug colours No danger of confusion with third-party products
Economical
No consumables such as oxygen or gas required
Simple
Simple connection technology
Universal
Can be used for surface-mounted and concealed installations
Resistant to salt water
High resistance to corrosion due to the copper-nickel-iron alloy (CuNi10Fe1,6Mn)
Experienced
More than 30 years of practical experience in pressing technology
Always consider The 6 stage pressing process
Cut and deburr the pipe
Mark the insertion depth on the pipe
Prepare the fitting
Insert the pipe in to the fitting
Press with the appropriate jaw or collar
Remove the pressing indicator
Check you are using the correct material for the required application. See page 8 for an in depth overview of the applications for Geberit Mapress CuNiFe. Only Geberit Mapress system pipes are suitable to press Geberit Mapress CuNiFe fittings. To adapt on to existing or dissimilar materials you must use a threaded connection.
Geberit Mapress CuNiFe
