GF Primofit Galv. Male Adaptor for PE NBR 50mm x R 1 1/2"

Stock No.
775202205
  • RRP: £32.89
  • RRP: £39.47
  •  Your Discount: 10%
  •  Your Saving: £3.95
  •  Your Saving: £3.29
£35.52 £29.60
More Information
Unit Of Measure Each
Diameter 50mm
Diameter #1 1 1/2"

GF_Logo

Georg Fischer Primofit Galvanised

Georg Fischer Primofit is a compression fitting which offers full end load capability. Additionally it allows a misalignment of the connected pipes up to 3° per compression joint.

Compression fitting according to prEN 10344 for connection of galvanised steel pipes according to EN 10255 and EN 10220 with measurements according to ISO 65

Click here for Technical Brochure

Features

  • Primofit compression fittings are pre-assembled, dismantling is not required
  • Minimum pipe preparation
  • End-Load resistant (push and pull-out), a fixing of the pipe is not required
  • Quick assembly - low costs
  • No special tools necessary
  • Small and compact fitting
  • Design of fitting bodies and nuts allow the use of shrink sleeves

Materials

Primofit compression fitting body and nuts are made out of white heart malleable cast iron EN-GJMW-400-5 acc. to EN 1562, sealing materials as above.

Corrosion protection by hot dip galvanising according to prEN 10344.

Primofit Firejoint

Primofit Firejoint is a compression fitting which offers full end load capability and resistance against fire impact from outside, 650°C according German DVGW and 850°C according to British Gas test procedures. An additional graphite ring maintains end load capability and sealing in case of a fire. Additionally it bears a misalignment of the connected pipes up to 3° per compression joint.

Compression fitting according to prEN 10344 for connection of galvanised or black steel pipes according to EN 10255 and EN 10220-series 1 with measurements according to ISO 65.

Cut-Off Time For Orders

We aim to ship all orders for next working day delivery (Monday to Friday excluding Public Holidays) subject to stock availability as long as the order is received before 3.00PM. If stock is not available for next day delivery we will contact you as soon as possible after order placement to advise delivery time.

Delivery Charges

All delivery rates below are for UK Mainland. For all other areas please contact us for delivery charge.

Coiled Pipe, Fittings and Valves - £10.00 (Ex VAT)

Pipe, fittings and valves including pipe lengths up to 6.0M - £20.00 (Ex VAT)

Delivery will be made by a reputable UK national carrier. In the unlikely event that the shipment contains damaged packages or packages are missing,  these must be documented on the driver’s consignment note.

Any missing or damaged items must be reported to us by e-mail within 3 days of the items being delivered.

Please note that we're unable to send items out by Royal Mail post.

Typical Delivery Time

We aim to deliver for all products within 1-2 days, unless stated differently.

A full VAT invoice will be e-mailed to you on despatch of your goods.

Product Returns

Should you wish to return any items please call us 01743 860088. You will be given a product returns number that should be used on all documentation and packaging associated with the return.

All goods to be returned should be well packed and sent back to our warehouse address using a reputable UK carrier.

You will be advised by us via e-mail when goods are received and checked off for suitability to re-stock.

You have 7 days to request a product returns number and begin the returns procedure. After which time, stock returns will be subject to a 25% re-stocking charge. No stock returns will be accepted 28 days after items have been delivered.

Please note we are unable to accept returns of pipe lengths and coils.

Product Complaints Procedure

In the unlikely event of a product quality issue or failure please call us as soon as possible on 01743 860088 or e-mail enquiries@pipekit.co.uk with as much information as possible including photographs  if available, so that we can work to resolving the situation.